Differences

This shows you the differences between two versions of the page.

--- domestic:rosplatforma:man:prlctl [2023/01/26 08:55] – [Migration management] mchus
+++ domestic:rosplatforma:man:prlctl [2023/02/09 06:43] (current) – mchus
@@ Line 1: / Line 1: @@
 ====== prlctl ======
-----
 ===== NAME  =====
@@ Line 8: / Line 6: @@
 ===== SYNOPSIS  =====
-prlctl **create** <//ve_name//> [**-t,--ostemplate** <//name//> **-o,--ostype** <//name// //list//> **-d,--distribution** <//name// //list//>] [**--vmtype ct vm**] [**--dst** <//path//>] [**--changesid**] [**--no-hdd**] [**--uuid** <//uuid//>] [**OPTIONS**]
+prlctl **create** <//ve_name//> [**-t,<nowiki>--</nowiki>ostemplate** <//name//> **-o,<nowiki>--</nowiki>ostype** <//name// //list//> **-d,<nowiki>--</nowiki>distribution** <//name// //list//>] [**<nowiki>--</nowiki>vmtype ct vm**] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>changesid**] [**<nowiki>--</nowiki>no-hdd**] [**<nowiki>--</nowiki>uuid** <//uuid//>] [**OPTIONS**]
-prlctl **backup** <//ve_id// //ve_name//> [**-f,--full**] [**-i,--incremental**] [**-s,--storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port] [--description** <//desc//>]>] [**--no-compression**] [**--no-tunnel**] [**--no-reversed-delta**]
+prlctl **backup** <//ve_id// //ve_name//> [**-f,<nowiki>--</nowiki>full**] [**-i,<nowiki>--</nowiki>incremental**] [**-s,<nowiki>--</nowiki>storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port] [<nowiki>--</nowiki>description** <//desc//>]>] [**<nowiki>--</nowiki>no-compression**] [**<nowiki>--</nowiki>no-tunnel**] [**<nowiki>--</nowiki>no-reversed-delta**]
-prlctl **backup-list** [//ve_id// //ve_name//] [**-f,--full**] [**--localvms**] [**--vmtype ct vm all**] [**-s,--storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>]
+prlctl **backup-list** [//ve_id// //ve_name//] [**-f,<nowiki>--</nowiki>full**] [**<nowiki>--</nowiki>localvms**] [**<nowiki>--</nowiki>vmtype ct vm all**] [**-s,<nowiki>--</nowiki>storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>]
-prlctl **backup-delete** {**<ve_id>**   **-t,--tag** <//backup_id//>} [**--keep-chain**] [**-s,--storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>]
+prlctl **backup-delete** {**<ve_id>**   **-t,<nowiki>--</nowiki>tag** <//backup_id//>} [**<nowiki>--</nowiki>keep-chain**] [**-s,<nowiki>--</nowiki>storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>]
-prlctl **restore** {**<ve_id>**   **-t,--tag** <//backup_id//>} [**-s,--storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] [**-n,--name** <**new_name**>] [**--dst** <//path//>] [**--no-tunnel**] [**--live**]
+prlctl **restore** {**<ve_id>**   **-t,<nowiki>--</nowiki>tag** <//backup_id//>} [**-s,<nowiki>--</nowiki>storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] [**-n,<nowiki>--</nowiki>name** <**new_name**>] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>no-tunnel**] [**<nowiki>--</nowiki>live**]
-prlctl **capture** <//ve_id// //ve_name//> [**--file** <//path//>]
+prlctl **capture** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>file** <//path//>]
-prlctl **clone** <//ve_id// //ve_name//> **--name** <//new_name//> [**--template**] [**--dst** <//path//>] [**--changesid**] [**--linked**] [**--detach-external-hdd** <//yes// //no//>] [**OPTIONS**]
+prlctl **clone** <//ve_id// //ve_name//> **<nowiki>--</nowiki>name** <//new_name//> [**<nowiki>--</nowiki>template**] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>changesid**] [**<nowiki>--</nowiki>linked**] [**<nowiki>--</nowiki>detach-external-hdd** <//yes// //no//>] [**OPTIONS**]
-prlctl **delete** <//ve_id// //ve_name//> [**--force**]
+prlctl **delete** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>force**]
 prlctl **installtools** <//ve_id// //ve_name//>
-prlctl **exec** <//ve_id// //ve_name//> [**--without-shell**] <**command**>
+prlctl **exec** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>without-shell**] <**command**>
 prlctl **enter** <//ve_id// //ve_name//>
@@ Line 32: / Line 30: @@
 prlctl **console** <//ve_id// //ve_name//>
-prlctl **list** [**-a,--all**] [**-L**] [**-o,--output** //field//[,//field//...]] [**-s,--sort** <//field// -//field//>] [**-t,--template**] [**--vmtype** <//ct// //vm// //all//>] [**-j,--json**]
+prlctl **list** [**-a,<nowiki>--</nowiki>all**] [**-L**] [**-o,<nowiki>--</nowiki>output** //field//[,//field//...]] [**-s,<nowiki>--</nowiki>sort** <//field// -//field//>] [**-t,<nowiki>--</nowiki>template**] [**<nowiki>--</nowiki>vmtype** <//ct// //vm// //all//>] [**-j,<nowiki>--</nowiki>json**]
-prlctl **list** -i,--info [**-f,--full**] [//ve_id// //ve_name//] [**-t,--template**] [**--vmtype ct vm all**] [**-j, --json**]
+prlctl **list** -i,<nowiki>--</nowiki>info [**-f,<nowiki>--</nowiki>full**] [//ve_id// //ve_name//] [**-t,<nowiki>--</nowiki>template**] [**<nowiki>--</nowiki>vmtype ct vm all**] [**-j, <nowiki>--</nowiki>json**]
-prlctl **migrate** <[**src_node/**]**ID**> <**dst_node**[**/NAME**]> [**--dst** <//path//>] [**--changesid**] [**--clone** **--remove-src**] [**--no-compression**] [**--no-tunnel**] [**--ssh** <//options//>]
+prlctl **migrate** <[**src_node/**]**ID**> <**dst_node**[**/NAME**]> [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>changesid**] [**<nowiki>--</nowiki>clone** **<nowiki>--</nowiki>remove-src**] [**<nowiki>--</nowiki>no-compression**] [**<nowiki>--</nowiki>no-tunnel**] [**<nowiki>--</nowiki>ssh** <//options//>]
 prlctl **pause** <//ve_id// //ve_name//> [**OPTIONS**]
-prlctl **problem-report** <//ve_id// //ve_name//> <**-d,--dump** **-s,--send** [**--proxy** [**user[:password]@proxyhost[:port]]**] [**--no-proxy**]> [**OPTIONS**]
+prlctl **problem-report** <//ve_id// //ve_name//> <**-d,<nowiki>--</nowiki>dump** **-s,<nowiki>--</nowiki>send** [**<nowiki>--</nowiki>proxy** [**user[:password]@proxyhost[:port]]**] [**<nowiki>--</nowiki>no-proxy**]> [**OPTIONS**]
-prlctl **reinstall** <//ve_id// //ve_name//> [**--no-backup**] [**--resetpwdb**] [**--ostemplates** <//name//>]
+prlctl **reinstall** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>no-backup**] [**<nowiki>--</nowiki>resetpwdb**] [**<nowiki>--</nowiki>ostemplates** <//name//>]
-prlctl **register** <//path//> [**--preserve-uuid**   **--uuid** <//UUID//>] [**--regenerate-src-uuid**] [**--force**] [**OPTIONS**]
+prlctl **register** <//path//> [**<nowiki>--</nowiki>preserve-uuid**   **<nowiki>--</nowiki>uuid** <//UUID//>] [**<nowiki>--</nowiki>regenerate-src-uuid**] [**<nowiki>--</nowiki>force**] [**OPTIONS**]
 prlctl **reset** <//ve_id// //ve_name//> [**OPTIONS**]
@@ Line 54: / Line 52: @@
 prlctl **reset-uptime** <//ve_id// //ve_name//>
-prlctl **set** <//ve_id// //ve_name//> [**--cpus** <//n//>] [**--cpu-sockets** <//n//>] [**--memsize** <//n//>] [**--videosize** <//n//>]
+prlctl **set** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>cpus** <//n//>] [**<nowiki>--</nowiki>cpu-sockets** <//n//>] [**<nowiki>--</nowiki>memsize** <//n//>] [**<nowiki>--</nowiki>videosize** <//n//>]
-  *  [**--3d-accelerate** <//off// //highest// //dx9//>] [**--vertical-sync** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>3d-accelerate** <//off// //highest// //dx9//>] [**<nowiki>--</nowiki>vertical-sync** <//on// //off//>]
-  *  [**--cpuunits** <//n//>] [**--cpulimit** <//n//>] [**--cpumask** <{//n//[,//n//,//n1//-//n2//] //all//}>] [**--nodemask** <{//n//[,//n//,//n1//-//n2//] //all//}>]
+  *  [**<nowiki>--</nowiki>cpuunits** <//n//>] [**<nowiki>--</nowiki>cpulimit** <//n//>] [**<nowiki>--</nowiki>cpumask** <{//n//[,//n//,//n1//-//n2//] //all//}>] [**<nowiki>--</nowiki>nodemask** <{//n//[,//n//,//n1//-//n2//] //all//}>]
-  *  [**--cpu-hotplug** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>cpu-hotplug** <//on// //off//>]
-  *  [**--ioprio** <//priority//>] [**--iolimit** <//limit//>] [**--iopslimit** <//limit//>]
+  *  [**<nowiki>--</nowiki>ioprio** <//priority//>] [**<nowiki>--</nowiki>iolimit** <//limit//>] [**<nowiki>--</nowiki>iopslimit** <//limit//>]
-  *  [**--mem-hotplug** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>mem-hotplug** <//on// //off//>]
-  *  [**--memguarantee** <//auto// //value//>]
+  *  [**<nowiki>--</nowiki>memguarantee** <//auto// //value//>]
-  *  [**--description** <//desc//>] [**--autostart** <//on// //off// //auto//>] [**--autostart-delay** <//n//>]
+  *  [**<nowiki>--</nowiki>description** <//desc//>] [**<nowiki>--</nowiki>autostart** <//on// //off// //auto//>] [**<nowiki>--</nowiki>autostart-delay** <//n//>]
-  *  [**--autostop** <//stop// //suspend//>]
+  *  [**<nowiki>--</nowiki>autostop** <//stop// //suspend//>]
-  *  [**--autocompact** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>autocompact** <//on// //off//>]
-  *  [**--tools-autoupdate** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>tools-autoupdate** <//on// //off//>]
-  *  [**--on-crash** <//pause// //restart//>[://no-report//]]
+  *  [**<nowiki>--</nowiki>on-crash** <//pause// //restart//>[://no-report//]]
-  *  [**--vnc-mode** <//auto// //manual// //off//>] [**--vnc-port** <//port//>] [{**--vnc-passwd** <//passwd//   //-//>   **--vnc-nopasswd**}] [**--vnc-address** <//address//>]
+  *  [**<nowiki>--</nowiki>vnc-mode** <//auto// //manual// //off//>] [**<nowiki>--</nowiki>vnc-port** <//port//>] [{**<nowiki>--</nowiki>vnc-passwd** <//passwd//   //-//>   **<nowiki>--</nowiki>vnc-nopasswd**}] [**<nowiki>--</nowiki>vnc-address** <//address//>]
-  *  [**--name** <//name//>] [**--rename-ext-disks**] [**--userpasswd** <//user:passwd//> [**--host-admin** <//name//>]]
+  *  [**<nowiki>--</nowiki>name** <//name//>] [**<nowiki>--</nowiki>rename-ext-disks**] [**<nowiki>--</nowiki>userpasswd** <//user:passwd//> [**<nowiki>--</nowiki>host-admin** <//name//>]]
-  *  [**--netfilter** <//disabled// //stateless// //stateful// //full//>]
+  *  [**<nowiki>--</nowiki>netfilter** <//disabled// //stateless// //stateful// //full//>]
-  *  [**--swappages** //pages//[://pages//] **--swap** //bytes//] [**--quotaugidlimit** //num//]
+  *  [**<nowiki>--</nowiki>swappages** //pages//[://pages//] **<nowiki>--</nowiki>swap** //bytes//] [**<nowiki>--</nowiki>quotaugidlimit** //num//]
-  *  [**--features** //name//:**on** **off**[**,**...]]
+  *  [**<nowiki>--</nowiki>features** //name//:**on** **off**[**,**...]]
-  *  [**--device-add** <//hdd// //cdrom// //net// //fdd// //serial// //usb//>   **--device-del** <//name//> [**--destroy-image** **--destroy-image-force** **--detach-only**]   **--device-set** <//name//>]
+  *  [**<nowiki>--</nowiki>device-add** <//hdd// //cdrom// //net// //fdd// //serial// //usb//>   **<nowiki>--</nowiki>device-del** <//name//> [**<nowiki>--</nowiki>destroy-image** **<nowiki>--</nowiki>destroy-image-force** **<nowiki>--</nowiki>detach-only**]   **<nowiki>--</nowiki>device-set** <//name//>]
-  *  [**--device-connect** <//name//>   **--device-disconnect** <//name//>]
+  *  [**<nowiki>--</nowiki>device-connect** <//name//>   **<nowiki>--</nowiki>device-disconnect** <//name//>]
-  *  [**--device-bootorder** "<//name1 name2 ...//>"]
+  *  [**<nowiki>--</nowiki>device-bootorder** "<//name1 name2 ...//>"]
-  *  [**--offline-management** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>offline-management** <//on// //off//>]
-  *  [**--hostname** <//hostname//>] [**--nameserver** <//addr//>] [**--searchdomain** <//addr//>]
+  *  [**<nowiki>--</nowiki>hostname** <//hostname//>] [**<nowiki>--</nowiki>nameserver** <//addr//>] [**<nowiki>--</nowiki>searchdomain** <//addr//>]
-  *  [**--rate** <//class//://KBits//>] [**--ratebound** <//yes// //no//>]
+  *  [**<nowiki>--</nowiki>rate** <//class//://KBits//>] [**<nowiki>--</nowiki>ratebound** <//yes// //no//>]
-  *  [**--applyconfig** <//conf//>] [**OPTIONS**]
+  *  [**<nowiki>--</nowiki>applyconfig** <//conf//>] [**OPTIONS**]
-  *  [**--nested-virt** <//on// //off//>]
+  *  [**<nowiki>--</nowiki>nested-virt** <//on// //off//>]
-  *  [**--efi-boot** <//on// //off//>] [**--select-boot-device** <//on// //off//>] [**--external-boot-device** <//name//>]
+  *  [**<nowiki>--</nowiki>efi-boot** <//on// //off//>] [**<nowiki>--</nowiki>select-boot-device** <//on// //off//>] [**<nowiki>--</nowiki>external-boot-device** <//name//>]
-  *  [**--ha-enable** <//yes// //no//>] [**--ha-prio** <//number//>]
+  *  [**<nowiki>--</nowiki>ha-enable** <//yes// //no//>] [**<nowiki>--</nowiki>ha-prio** <//number//>]
-  *  [**--template** <//yes// //no//>]
+  *  [**<nowiki>--</nowiki>template** <//yes// //no//>]
-  *  [**--backup-add** <//backup_id//> [**--disk** <//disk_name//>]
+  *  [**<nowiki>--</nowiki>backup-add** <//backup_id//> [**<nowiki>--</nowiki>disk** <//disk_name//>]
-  *  [**--backup-del** <//backup_id// //all//>]
+  *  [**<nowiki>--</nowiki>backup-del** <//backup_id// //all//>]
 prlctl **start** <//ve_id// //ve_name//> [**OPTIONS**]
-prlctl **stop** <//ve_id// //ve_name//> [**--kill**] [**OPTIONS**]
+prlctl **stop** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>kill**] [**OPTIONS**]
-prlctl **snapshot** <//ve_id// //name//> [**-n**,**--name** <//name//>]
+prlctl **snapshot** <//ve_id// //name//> [**-n**,**<nowiki>--</nowiki>name** <//name//>]
-prlctl **snapshot-list** <//ve_id// //name//> [{**-t**,**--tree**   **-i**,**--id** <//snapid//>}]
+prlctl **snapshot-list** <//ve_id// //name//> [{**-t**,**<nowiki>--</nowiki>tree**   **-i**,**<nowiki>--</nowiki>id** <//snapid//>}]
-prlctl **snapshot-delete** <//ve_id// //name//>" **-i**,**--id** <//snapid//> [**-c**,**--children**]
+prlctl **snapshot-delete** <//ve_id// //name//>" **-i**,**<nowiki>--</nowiki>id** <//snapid//> [**-c**,**<nowiki>--</nowiki>children**]
-prlctl **snapshot-switch** <//ve_id// //name//>" **-i**,**--id** <//snapid//>
+prlctl **snapshot-switch** <//ve_id// //name//>" **-i**,**<nowiki>--</nowiki>id** <//snapid//>
 prlctl **suspend** <//ve_id// //ve_name//> [**OPTIONS**]
@@ Line 101: / Line 99: @@
 prlctl **unregister** <//ve_id// //ve_name//> [**OPTIONS**]
-prlctl **mount** <//ve_id// //ve_name//> [{**-o** <//ro// //rw//>   **--info**}]
+prlctl **mount** <//ve_id// //ve_name//> [{**-o** <//ro// //rw//>   **<nowiki>--</nowiki>info**}]
 prlctl **umount** <//ve_id// //ve_name//>
-prlctl **move** <//ve_id// //ve_name//> **--dst** <//path//>
+prlctl **move** <//ve_id// //ve_name//> **<nowiki>--</nowiki>dst** <//path//>
-prlctl **statistics** {<//ve_id// //ve_name//> **-a**,**--all**} [**--filter** <//filter//>] [**--loop**]
+prlctl **statistics** {<//ve_id// //ve_name//> **-a**,**<nowiki>--</nowiki>all**} [**<nowiki>--</nowiki>filter** <//filter//>] [**<nowiki>--</nowiki>loop**]
 ===== DESCRIPTION  =====
@@ Line 117: / Line 115: @@
 The following flags can be used with the majority of **prlctl** commands.
-  *  **-l,--login user<nowiki>[[:</nowiki>passwd]@server** - Connect to the remote R-Virtualization server using the IP address or hostname of **server** and the specified credentials (i.e. the **user** username and **passwd** password). If no connection parameters are specified, **prlctl** assumes that the command is run on the local server.
+  *  **-l,<nowiki>--</nowiki>login user<nowiki>[[:</nowiki>passwd]@server** - Connect to the remote R-Virtualization server using the IP address or hostname of **server** and the specified credentials (i.e. the **user** username and **passwd** password). If no connection parameters are specified, **prlctl** assumes that the command is run on the local server.
-  * **-p,--read-passwd** <//file//> - Use the password from the **file** file to log in to the remote R-Virtualization server whose connection parameters are specified after the **--login** option.
+  * **-p,<nowiki>--</nowiki>read-passwd** <//file//> - Use the password from the **file** file to log in to the remote R-Virtualization server whose connection parameters are specified after the **<nowiki>--</nowiki>login** option.
-  * **-v,--verbose <n>** - Configure the **prlctl** logging level.
+  * **-v,<nowiki>--</nowiki>verbose <n>** - Configure the **prlctl** logging level.
-  * **--timeout <sec>** - Specify a custom operation timeout in seconds. By default, timeouts for all operation are unlimited.
+  * **<nowiki>--</nowiki>timeout <sec>** - Specify a custom operation timeout in seconds. By default, timeouts for all operation are unlimited.
 ==== Managing virtual environments ====
-  * **create** <//ve_name//> **-t,--ostemplate** <//name//> [**--vmtype ct vm**] [**--dst** <//path//>] [**--uuid** <//uuid//>] [**--changesid**] - Create the virtual environment with the name of **<ve_name>** on the basis of the specified template. You can get the list of available templates using the **prlctl list -t** command.
+  * **create** <//ve_name//> **-t,<nowiki>--</nowiki>ostemplate** <//name//> [**<nowiki>--</nowiki>vmtype ct vm**] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>uuid** <//uuid//>] [**<nowiki>--</nowiki>changesid**] - Create the virtual environment with the name of **<ve_name>** on the basis of the specified template. You can get the list of available templates using the **prlctl list -t** command.
-    * Use the **--changesid** option to assign the new Windows-based virtual machine a new Windows security identifier (SID). Note: R-Virtualization Guest Tools must be installed in the virtual machine.
+    * Use the **<nowiki>--</nowiki>changesid** option to assign the new Windows-based virtual machine a new Windows security identifier (SID). Note: R-Virtualization Guest Tools must be installed in the virtual machine.
-    * Use the **--uuid** option to manually specify the UUID to use.
+    * Use the **<nowiki>--</nowiki>uuid** option to manually specify the UUID to use.
-  * **create** <//ve_name//> [**-o,--ostype** <//name// //list//>] [**--vmtype ct vm**] [**--dst** <//path//>] [**--uuid** <//uuid//>] [**--no-hdd**] - Create the virtual environment with the name of **<ve_name>** and optimize it for use with the operating system (OS) family specified after the **--ostype** option, respectively. You can get the list of available os types using the **prlctl create ve_name -o list** command.
+  * **create** <//ve_name//> [**-o,<nowiki>--</nowiki>ostype** <//name// //list//>] [**<nowiki>--</nowiki>vmtype ct vm**] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>uuid** <//uuid//>] [**<nowiki>--</nowiki>no-hdd**] - Create the virtual environment with the name of **<ve_name>** and optimize it for use with the operating system (OS) family specified after the **<nowiki>--</nowiki>ostype** option, respectively. You can get the list of available os types using the **prlctl create ve_name -o list** command.
-  * **create** <//ve_name//> [**-d,--distribution** <//name// //list//>] [**--vmtype ct vm**] [**--dst** <//path//>] [**--uuid** <//uuid//>] [**--no-hdd**] - Create the virtual environment with the name of **<ve_name>** and optimize it for use with the operating system (OS) family specified after the **--distribution** option, respectively. You can get the list of available distributions using the **prlctl create ve_name -d list** command.
+  * **create** <//ve_name//> [**-d,<nowiki>--</nowiki>distribution** <//name// //list//>] [**<nowiki>--</nowiki>vmtype ct vm**] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>uuid** <//uuid//>] [**<nowiki>--</nowiki>no-hdd**] - Create the virtual environment with the name of **<ve_name>** and optimize it for use with the operating system (OS) family specified after the **<nowiki>--</nowiki>distribution** option, respectively. You can get the list of available distributions using the **prlctl create ve_name -d list** command.
-    * Use the **--dst** option to set the path to the directory on the R-Virtualization server where the **<ve_uuid>** directory with files of the newly created virtual environment will be stored.
+    * Use the **<nowiki>--</nowiki>dst** option to set the path to the directory on the R-Virtualization server where the **<ve_uuid>** directory with files of the newly created virtual environment will be stored.
-    * Use the **--no-hdd** option to create virtual environment without hard disk drives.
+    * Use the **<nowiki>--</nowiki>no-hdd** option to create virtual environment without hard disk drives.
     * After the virtual environment has been successfully created, you should install the corresponding operating system inside it.
-  * **clone** <//ve_id// //ve_name//> **--name** <//new_name//> [**--template**] [**--dst** <//path//>] [**--changesid**] [**--linked**] [**--detach-external-hdd** <//yes// //no//>] - Make a copy of a virtual environment and name it <//new_name//>. The difference between the original and the clone is that the clone is assigned a new MAC address.
+  * **clone** <//ve_id// //ve_name//> **<nowiki>--</nowiki>name** <//new_name//> [**<nowiki>--</nowiki>template**] [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>changesid**] [**<nowiki>--</nowiki>linked**] [**<nowiki>--</nowiki>detach-external-hdd** <//yes// //no//>] - Make a copy of a virtual environment and name it <//new_name//>. The difference between the original and the clone is that the clone is assigned a new MAC address.
-    * Use the **--template** option to create a template of a virtual environment.
+    * Use the **<nowiki>--</nowiki>template** option to create a template of a virtual environment.
-    * Use the **--dst** option to specify the path to the directory where the **<ve_uuid>** directory with files of the cloned virtual environment will be stored. If this option is omitted, the clone will be created in the default directory.
+    * Use the **<nowiki>--</nowiki>dst** option to specify the path to the directory where the **<ve_uuid>** directory with files of the cloned virtual environment will be stored. If this option is omitted, the clone will be created in the default directory.
-    * Use the **--changesid** option to assign the clone a new Windows security identifier (SID). Note: R-Virtualization Guest Tools must be installed in the original Windows-based virtual machine.
+    * Use the **<nowiki>--</nowiki>changesid** option to assign the clone a new Windows security identifier (SID). Note: R-Virtualization Guest Tools must be installed in the original Windows-based virtual machine.
-    * Use the **--linked** option is used to create a linked clone of the virtual environment.
+    * Use the **<nowiki>--</nowiki>linked** option is used to create a linked clone of the virtual environment.
-    * Use the **--detach-external-hdd** <//yes// //no//> option to specify whether to keep or remove hard disks located outside of the original virtual environment. If you specify //yes//, outside hard disks will be removed from the resulting configuration. If you specify //no//, outside hard disks will remain in the resulting configuration. Note: In either case, outside hard disks will not be copied to the destination.
+    * Use the **<nowiki>--</nowiki>detach-external-hdd** <//yes// //no//> option to specify whether to keep or remove hard disks located outside of the original virtual environment. If you specify //yes//, outside hard disks will be removed from the resulting configuration. If you specify //no//, outside hard disks will remain in the resulting configuration. Note: In either case, outside hard disks will not be copied to the destination.
-  * **delete** <//ve_id// //ve_name//> - Remove the specified virtual environment from the R-Virtualization server by deleting all VE-related files and directories. You can use the **--force** option to forcibly stop the VE.
+  * **delete** <//ve_id// //ve_name//> - Remove the specified virtual environment from the R-Virtualization server by deleting all VE-related files and directories. You can use the **<nowiki>--</nowiki>force** option to forcibly stop the VE.
   * **installtools** <//ve_id// //ve_name//> - Connect the R-Virtualization Guest Tools image to the VE using its CD/DVD-ROM device, so that the guest operating system is able to install or update the tools from it.
-  * **exec** <//ve_id// //ve_name//> <**command**> - Execute the **command** command in the virtual environment. For virtual machines, it requires R-Virtualization Guest Tools to be installed. Commands in Linux and Windows guests are run via bash -c "command" and cmd /c "command", respectively. If the **--without-shell** option is specified, the command is run directly without bash or cmd shell.
+  * **exec** <//ve_id// //ve_name//> <**command**> - Execute the **command** command in the virtual environment. For virtual machines, it requires R-Virtualization Guest Tools to be installed. Commands in Linux and Windows guests are run via bash -c "command" and cmd /c "command", respectively. If the **<nowiki>--</nowiki>without-shell** option is specified, the command is run directly without bash or cmd shell.
   * **enter** <//ve_id// //ve_name//> - Log in to the virtual environment. For virtual machines, it requires R-Virtualization Guest Tools to be installed.
   * **console** <//ve_id// //ve_name//> - Attach to the Container’s console. To exit from the console, press "Esc" then "." (Note: This sequence is only recognized after Enter). Note that you can even attach to a console if a Container is not yet running.
-  * **capture** <//ve_id// //ve_name//> [**--file** <//path//>] - Take a screenshot of a current virtual environment console in PNG format. If the **--file** option is specified, a screenshot is stored to the path //path//; otherwise, it is dumped to stdout.
+  * **capture** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>file** <//path//>] - Take a screenshot of a current virtual environment console in PNG format. If the **<nowiki>--</nowiki>file** option is specified, a screenshot is stored to the path //path//; otherwise, it is dumped to stdout.
   * **pause** <//ve_id// //ve_name//> - Pause the specified virtual environment.
-  * **problem-report** <//ve_id// //ve_name//> <**-d,--dump** **-s,--send** [**--proxy** **user[:password]@proxyhost[:port]]**] [**--no-proxy**]> [**OPTIONS**] - Generate a problem report. If the **-s,--send** option is specified, the report is sent to R-Virtualization development team; otherwise, it is dumped to stdout.
+  * **problem-report** <//ve_id// //ve_name//> <**-d,<nowiki>--</nowiki>dump** **-s,<nowiki>--</nowiki>send** [**<nowiki>--</nowiki>proxy** **user[:password]@proxyhost[:port]]**] [**<nowiki>--</nowiki>no-proxy**]> [**OPTIONS**] - Generate a problem report. If the **-s,<nowiki>--</nowiki>send** option is specified, the report is sent to R-Virtualization development team; otherwise, it is dumped to stdout.
-  * **register** <//path//> [**--preserve-uuid**   **--uuid** <//UUID//>] [**--regenerate-src-uuid**] [**--force**] - Register the virtual environment whose configuration file has the path of //path//. If the **--preserve-uuid** option is specified, the virtual environment ID will not changed. If the **--uuid** option is specified, the provided //UUID// will be used for virtual environment ID, otherwise, it will be regenerated. If the **--regenerate-src-uuid** option is specified, the virtual environment source ID will be regenerated (SMBIOS product id will be changed as well). If the **--force** option is specified, all validation checks will be skipped.
+  * **register** <//path//> [**<nowiki>--</nowiki>preserve-uuid**   **<nowiki>--</nowiki>uuid** <//UUID//>] [**<nowiki>--</nowiki>regenerate-src-uuid**] [**<nowiki>--</nowiki>force**] - Register the virtual environment whose configuration file has the path of //path//. If the **<nowiki>--</nowiki>preserve-uuid** option is specified, the virtual environment ID will not changed. If the **<nowiki>--</nowiki>uuid** option is specified, the provided //UUID// will be used for virtual environment ID, otherwise, it will be regenerated. If the **<nowiki>--</nowiki>regenerate-src-uuid** option is specified, the virtual environment source ID will be regenerated (SMBIOS product id will be changed as well). If the **<nowiki>--</nowiki>force** option is specified, all validation checks will be skipped.
-  * **reinstall** <//ve_id// //ve_name//> [**--no-backup**] [**--resetpwdb**] [**--ostemplates** <//name//>] - Recreates container’s root virtual disk, installs all applications previously installed from application templates, copies credentials from the old container (unless **--resetpwdb** is specified), and renames the old root directory ’/’ to ’/old’ (unless **--no-backup** is specified).
+  * **reinstall** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>no-backup**] [**<nowiki>--</nowiki>resetpwdb**] [**<nowiki>--</nowiki>ostemplates** <//name//>] - Recreates container’s root virtual disk, installs all applications previously installed from application templates, copies credentials from the old container (unless **<nowiki>--</nowiki>resetpwdb** is specified), and renames the old root directory ’/’ to ’/old’ (unless **<nowiki>--</nowiki>no-backup** is specified).
   * **reset** <//ve_id// //ve_name//> - Reset the specified virtual environment.
   * **start** <//ve_id// //ve_name//> - Start the specified virtual environment.
   * **restart** <//ve_id// //ve_name//> - Restart the specified virtual environment.
-  * **stop** <//ve_id// //ve_name//> [**--kill**] - Stop the specified virtual environment. You can use the **--kill** option to forcibly stop the VE.
+  * **stop** <//ve_id// //ve_name//> [**<nowiki>--</nowiki>kill**] - Stop the specified virtual environment. You can use the **<nowiki>--</nowiki>kill** option to forcibly stop the VE.
   * **status** <//ve_id// //ve_name//> - Display the status of the specified virtual environment.
   * **unregister** <//ve_id// //ve_name//> - Unregister the specified virtual environment.
@@ Line 158: / Line 156: @@
   * **resume** <//ve_id// //ve_name//> - Resume the specified virtual environment.
   * **reset-uptime** <//ve_id// //ve_name//> - Resets the specified virtual environment uptime counter (counter start date/time also will be reset with this action).
-  * **mount** <//ve_id// //ve_name//> [{**-o** <//ro// //rw//>   **--info**}] - Mounts the specified virtual environment.
+  * **mount** <//ve_id// //ve_name//> [{**-o** <//ro// //rw//>   **<nowiki>--</nowiki>info**}] - Mounts the specified virtual environment.
   * **umount** <//ve_id// //ve_name//> - Unmounts the specified virtual environment.
-  * **move** <//ve_id// //ve_name//> **--dst** <//path//> - Moves the directory with files of the specified virtual environment to a new location on the same server.
+  * **move** <//ve_id// //ve_name//> **<nowiki>--</nowiki>dst** <//path//> - Moves the directory with files of the specified virtual environment to a new location on the same server.
 ==== Container action scripts ====
@@ Line 170: / Line 168: @@
 Custom action scripts can be of two types:
-  • Global, executed for all containers on host. Such scripts must have the prefix ’vps’ (e.g., ’vps.mount’) and need to be placed in ’/etc/vz/conf/’.
+  - **Global**, executed for all containers on host. Such scripts must have the prefix ’vps’ (e.g., ’vps.mount’) and need to be placed in ’/etc/vz/conf/’.
-  • per-container, executed for specific containers. Such scripts must not have the prefix ’vps’ and need to be placed in ’/vz/private/<CT_UUID>/scripts/’.
+  - **per-container**, executed for specific containers. Such scripts must not have the prefix ’vps’ and need to be placed in ’/vz/private/<CT_UUID>/scripts/’.
-**vps.mount**, **mount**
+  * **vps.mount**, **mount**  - Executed after a container is mounted. Can be global or container-specific.
+  * **start** - Executed in container context on container start.
+  * **stop** - Executed in container context on container stop.
+  * **vps.umount**, **umount** - Executed before a container unmounted. Can be global or container-specific.
-Executed after a container is mounted. Can be global or container-specific.
+<WRAP center round tip 60%>
+All action scripts except **start** and **stop** are executed in the host context. The **start** and **stop** scripts are executed in the container context.
-**start**
+</WRAP>
-Executed in container context on container start.
-**stop**
-Executed in container context on container stop.
-**vps.umount**, **umount**
-Executed before a container unmounted. Can be global or container-specific.
-**NOTE**: All action scripts except **start** and **stop** are executed in the host context. The **start** and **stop** scripts are executed in the container context.
 The environment passed to the **mount** and **umount** scripts is the standard environment of the parent (e.g., prlctl) with two additional variables: **$VEID** and **$VE_CONFFILE**. The first has the container UUID and the second has the full path to container’s configuration file. Other container configuration parameters required for the script (such as **$VE_ROOT**) can be obtained from the global and per-container configuration files.
-**Listing virtual environments\\
+==== Listing virtual environments ====
-list** [**-a,--all**] [**-L**] [**-o,--output** //field//[,//field//...]] [**-s,--sort**\\
+  * **list** [**-a,<nowiki>--</nowiki>all**] [**-L**] [**-o,<nowiki>--</nowiki>output** //field//[,//field//...]] [**-s,<nowiki>--</nowiki>sort**<//field// -//field//>] [**-t,<nowiki>--</nowiki>template**] [**<nowiki>--</nowiki>vmtype** <//ct// //vm// //all//>] [**-j,<nowiki>--</nowiki>json**] - List the virtual environments currently existing on the R-Virtualization server. By default, only running VEs are displayed.
-<//field// -//field//>] [**-t,--template**] [**--vmtype** <//ct// //vm// //all//>] [**-j,--json**]
+    * **-o, <nowiki>--</nowiki>output** //field//[,//field//...] - Display only the specified //field//(s).
+    * **-s,<nowiki>--</nowiki>sort** <//field// -//field//> - Sort by the value of //field// (arguments are the same as those for **-o**). Add **-** before the field name to reverse the sort order.
-List the virtual environments currently existing on the R-Virtualization server. By default, only running VEs are displayed.
+    * **-L**  List fields which can be used for both the output (**-o**, **<nowiki>--</nowiki>output**) and sort order (**-s**, **<nowiki>--</nowiki>sort**) options. Use the **<nowiki>--</nowiki>vmtype** option to display fields pertaining to the specified virtual environment type.
+    * **<nowiki>--</nowiki>vmtype** <//ct// //vm// //all//> - Display only virtual environments of the specified type.
-**-o, --output** //field//[,//field//...]
+    * **-t, <nowiki>--</nowiki>template** - Include templates in the output.
+    * **-j,<nowiki>--</nowiki>json** - Produce output in the JSON format.
-Display only the specified //field//(s).
+  * **list** -i,<nowiki>--</nowiki>info [**-f,<nowiki>--</nowiki>full**] [//ve_id// //ve_name//] [**-t,<nowiki>--</nowiki>template**] [**<nowiki>--</nowiki>vmtype ct vm all**] [**-j, <nowiki>--</nowiki>json**] - Display the information on the VE configuration. By default, the information on all VEs currently existing on the R-Virtualization server is shown. Use the **<nowiki>--</nowiki>full** option to display additional information about virtual environments. You can also use the **<nowiki>--</nowiki>json** option to produce machine-readable output in JSON format.
-**-s,--sort** <//field// -//field//>
-Sort by the value of //field// (arguments are the same as those for **-o**). Add **-** before the field name to reverse the sort order.
-  **-L**  List fields which can be used for both the output (**-o**, **--output**) and sort order (**-s**, **--sort**) options. Use the **--vmtype** option to display fields pertaining to the specified virtual environment type.
-**--vmtype** <//ct// //vm// //all//>
-Display only virtual environments of the specified type.
-**-t, --template**
-Include templates in the output.
-**-j,--json**
-Produce output in the JSON format.
-**list** -i,--info [**-f,--full**] [//ve_id// //ve_name//] [**-t,--template**] [**--vmtype\\
-ct vm all**] [**-j, --json**]
-Display the information on the VE configuration. By default, the information on all VEs currently existing on the R-Virtualization server is shown. Use the **--full** option to display additional information about virtual environments. You can also use the **--json** option to produce machine-readable output in JSON format.
 ==== Configuring VE resource parameters ====
-set** <//ve_id// //name//> [**SET_OPTIONS**]
+  * **set** <//ve_id// //name//> [**SET_OPTIONS**] - This command is used to set and configure various VE parameters.
-This command is used to set and configure various VE parameters.\\
+The following options can be used with the **set** command.
-The following options can be used with the **set** command:
 === CPU parameters ===
---cpus** <//num//>
+  * **<nowiki>--</nowiki>cpus** <//num//> - Set the number of CPU cores per CPU socket to be available to the VE.
+  * **<nowiki>--</nowiki>cpu-sockets** <//num//> - Set the number of CPU sockets to be available to the VE.
-Set the number of CPU cores per CPU socket to be available to the VE.
+  * **<nowiki>--</nowiki>cpu-hotplug** <//on// //off//> - Enable or disable CPU hot-plugging support in the virtual environment.
+  * **<nowiki>--</nowiki>cpuunits** <//n//> - Sets the CPU weight for the virtual environment. This is a positive integer number that defines how much CPU time the virtual environment can get as compared to the other virtual environments running on the server. The larger the number, the more CPU time the virtual environment can receive. Possible values range from 8 to 500000. If this parameter is not set, the default value of 1000 is used.
-**--cpu-sockets** <//num//>
+  * **<nowiki>--</nowiki>cpulimit** <//n//> - Sets the CPU limit, in percent or megahertz (MHz), the virtual environment is not allowed to exceed. By default, the limit is set in percent. To specify the limit in MHz, specify "m" after the value. Note: If the computer has 2 CPUs, the total CPU time equals 200%.
+  * **<nowiki>--</nowiki>cpumask** <{//n//[,//n//,//n1//-//n2//] //all//}> - Defines the CPUs on the physical server to use for executing the virtual environment process. A CPU affinity mask can be a single CPU number or a CPU range separated by commas (0,2,3-10).
-Set the number of CPU sockets to be available to the VE.
+  * **<nowiki>--</nowiki>nodemask** <{//n//[,//n//,//n1//-//n2//] //all//}> - Defines the NUMA node on the physical server to use for executing the virtual environment process. A node mask can be a single number or a range separated by commas, e.g., 0,2,3-10.
-**--cpu-hotplug** <//on// //off//>
-Enable or disable CPU hot-plugging support in the virtual environment.
-**--cpuunits** <//n//>
-Sets the CPU weight for the virtual environment. This is a positive integer number that defines how much CPU time the virtual environment can get as compared to the other virtual environments running on the server. The larger the number, the more CPU time the virtual environment can receive. Possible values range from 8 to 500000. If this parameter is not set, the default value of 1000 is used.
-**--cpulimit** <//n//>
-Sets the CPU limit, in percent or megahertz (MHz), the virtual environment is not allowed to exceed. By default, the limit is set in percent. To specify the limit in MHz, specify "m" after the value. Note: If the computer has 2 CPUs, the total CPU time equals 200%.
-**--cpumask** <{//n//[,//n//,//n1//-//n2//] //all//}>
-Defines the CPUs on the physical server to use for executing the virtual environment process. A CPU affinity mask can be a single CPU number or a CPU range separated by commas (0,2,3-10).
-**--nodemask** <{//n//[,//n//,//n1//-//n2//] //all//}>
-Defines the NUMA node on the physical server to use for executing the virtual environment process. A node mask can be a single number or a range separated by commas, e.g., 0,2,3-10.
 === Memory parameters ===
---memsize** <//num//>
+  * **<nowiki>--</nowiki>memsize** <//num//> - Set the amount of memory that the virtual environment can consume.
+  * **<nowiki>--</nowiki>mem-hotplug** <//on// //off//> - Enable or disable memory (RAM) hot-plugging support in the virtual environment.
-Set the amount of memory that the virtual environment can consume.
+  * **<nowiki>--</nowiki>memguarantee** <//auto// //value//> - Set the amount of memory (RAM) that will be guaranteed to a virtual machine or container. The guaranteed memory is a percentage of total RAM that is set for the virtual machine or container with the **<nowiki>--</nowiki>memsize** option. By default, memory guarantee is set to ’auto’ (depends on vcmmd policy for virtual machine and no guarantee for containter).
-**--mem-hotplug** <//on// //off//>
-Enable or disable memory (RAM) hot-plugging support in the virtual environment.
-**--memguarantee** <//auto// //value//>
-Set the amount of memory (RAM) that will be guaranteed to a virtual machine or container. The guaranteed memory is a percentage of total RAM that is set for the virtual machine or container with the **--memsize** option. By default, memory guarantee is set to ’auto’ (depends on vcmmd policy for virtual machine and no guarantee for containter).
 === Boot order parameters ===
---device-bootorder** <//"name1 name2 ..."//>
+  * **<nowiki>--</nowiki>device-bootorder** <//"name1 name2 ..."//> - Used to specify the order of boot devices for a virtual environment. Supported devices are HDD, CD/DVD, FDD, Network. A device name can obtained using the ’prlctl list -i’ command.
+  * **<nowiki>--</nowiki>efi-boot** <//on// //off//> - Set EFI boot options:
-Used to specify the order of boot devices for a virtual environment. Supported devices are HDD, CD/DVD, FDD, Network. A device name can obtained using the ’prlctl list -i’ command.
+    * //on//: The virtual environment is booting using the EFI firmware.
+    * //off//: The virtual environment is booting using the BIOS firmware. This option is used by default.
-**--efi-boot** <//on// //off//>
+  * **<nowiki>--</nowiki>select-boot-device** <//on// //off//>  - Enable or disable the selection of a boot device at the virtual environment startup.
+  * **<nowiki>--</nowiki>external-boot-device** <//name//> - Set an external device from which to boot the virtual environment.
-Set EFI boot options: //\\
-on//: The virtual environment is booting using the EFI firmware. //\\
-off//: The virtual environment is booting using the BIOS firmware. This option is used by default.
-**--select-boot-device** <//on// //off//>
-Enable or disable the selection of a boot device at the virtual environment startup.
-**--external-boot-device** <//name//>
-Set an external device from which to boot the virtual environment.
 === Video parameters ===
---videosize** <//num//>
+  * **<nowiki>--</nowiki>videosize** <//num//> - Set the amount of memory for the virtual environment graphic card.
+  * **<nowiki>--</nowiki>3d-accelerate** <//off// //highest// //dx9//> - Set 3d acceleration video mode.
-Set the amount of memory for the virtual environment graphic card.
+  * **<nowiki>--</nowiki>vertical-sync** <//on// //off//> - Set vertical synchronization video mode.
-**--3d-accelerate** <//off// //highest// //dx9//>
-Set 3d acceleration video mode.
-**--vertical-sync** <//on// //off//>
-Set vertical synchronization video mode.
 === I/O priority management ===
---ioprio** <//priority//>
+  * **<nowiki>--</nowiki>ioprio** <//priority//> - Assigns I/O priority to VE. //priority// range is **0-7**. The greater //priority// is, the more time for I/O activity VE has. By default each VE has //priority// of **4**.
+  * **<nowiki>--</nowiki>iolimit** //limit//[**B** **K** **M** **G**] - Sets the I/O limit for the virtual environment. If no suffix is specified, the parameter is set in megabytes per second. The possible suffixes are listed below:
+    * **b**, **B** <nowiki>--</nowiki> bytes
+    * **k**, **K** <nowiki>--</nowiki> kilobytes
+    * **m**, **M** <nowiki>--</nowiki> megabytes
+    * **g**, **G** <nowiki>--</nowiki> gigabytes
+    * By default, the I/O limit of each virtual environment is set to 0 (that is, not limited).
-Assigns I/O priority to VE. //priority// range is **0-7**. The greater //priority// is, the more time for I/O activity VE has. By default each VE has //priority// of **4**.
+  * **<nowiki>--</nowiki>iopslimit** <//limit//> - Assigns Input/Output Operations Per Second limit.
-**--iolimit** //limit//[**B** **K** **M** **G**]
-Sets the I/O limit for the virtual environment. If no suffix is specified, the parameter is set in megabytes per second. The possible suffixes are listed below: **\\
-b**, **B** -- bytes **\\
-k**, **K** -- kilobytes **\\
-m**, **M** -- megabytes **\\
-g**, **G** -- gigabytes
-By default, the I/O limit of each virtual environment is set to 0 (that is, not limited).
-**--iopslimit** <//limit//>
-Assigns Input/Output Operations Per Second limit.
 === Network parameters ===
---apply-iponly** <//yes no//**>**
+**<nowiki>--</nowiki>apply-iponly** <//yes no//**>** - If set to "yes", the hostname, nameserver, and search domain settings from the virtual environment/Container configuration file are ignored.
-If set to "yes", the hostname, nameserver, and search domain settings from the virtual environment/Container configuration file are ignored.
 === Container specific parameters ===
---netfilter** <//disabled// //stateless// //stateful// //full//>
+  * **<nowiki>--</nowiki>netfilter** <//disabled// //stateless// //stateful// //full//> - Restrict access to iptable modules inside the Container. The following modes are available:
+    * //disabled// <nowiki>--</nowiki> no modules are allowed.
+    * //stateless// <nowiki>--</nowiki> all modules except NAT and conntracks are allowed.
+    * //stateful// <nowiki>--</nowiki> all modules except NAT are allowed.
+    * //full// <nowiki>--</nowiki> (default) all modules are allowed.
+    * Note: This parameter cannot be applied to running Containers.
+  * **<nowiki>--</nowiki>swappages** //pages//[://pages//] **<nowiki>--</nowiki>swap** //bytes// - This parameter limits the amount of swap space that can be allocated to processes running in a Container.
+  * **<nowiki>--</nowiki>quotaugidlimit** //num// - Sets the maximum number of user/group IDs in a Container for which disk quota is calculated. If this value is set to **0**, user and group disk quotas are not calculated. For ploop-based Containers, quotaugidlimit can be only enabled or disabled. Setting the //num// parameter to a value greater than 0 enables the quota, and **0** disables the quota.
-Restrict access to iptable modules inside the Container. The following modes are available: //\\
+<WRAP center round tip 60%>
-disabled// -- no modules are allowed. //\\
+Changing this parameter for a running Container, requires the Container be restarted.
-stateless// -- all modules except NAT and conntracks are allowed. //\\
+</WRAP>
-stateful// -- all modules except NAT are allowed. //\\
-full// -- (default) all modules are allowed.
-Note: This parameter cannot be applied to running Containers.
+  * **<nowiki>--</nowiki>features** //name//:**on** **off**[**,**...] - Enables/disables feature for CT. Multiple comma-separated values can be specified. You can use the following values for //name//: **bridge**, **ipgre**, **ipip**, **nfs**, **nfsd**, **ppp**, **sit**, **time**.
-**--swappages** //pages//[://pages//] **--swap** //bytes//
-This parameter limits the amount of swap space that can be allocated to processes running in a Container.
-**--quotaugidlimit** //num//
-Sets the maximum number of user/group IDs in a Container for which disk quota is calculated. If this value is set to **0**, user and group disk quotas are not calculated. For ploop-based Containers, quotaugidlimit can be only enabled or disabled. Setting the //num// parameter to a value greater than 0 enables the quota, and **0** disables the quota.
-Note: Changing this parameter for a running Container, requires the Container be restarted.
-**--features** //name//:**on** **off**[**,**...]
-Enables/disables feature for CT. Multiple comma-separated values can be specified.
-You can use the following values for //name//: **bridge**, **ipgre**, **ipip**, **nfs**, **nfsd**, **ppp**, **sit**, **time**.
 === VNC parameters ===
---vnc-mode** <//auto// //manual// //off//>
+  * **<nowiki>--</nowiki>vnc-mode** <//auto// //manual// //off//> - Enables/disables access to the virtual environment via the VNC protocol. A password is required to enable VNC support, or the **<nowiki>--</nowiki>vnc-nopasswd** option must be used.
+  * **<nowiki>--</nowiki>vnc-port** <//port//> - Sets the VNC port.
-Enables/disables access to the virtual environment via the VNC protocol. A password is required to enable VNC support, or the **--vnc-nopasswd** option must be used.
+  * **<nowiki>--</nowiki>vnc-passwd** <//passwd//   //-//> - Sets the VNC password to //passwd//. If **-** is specified, user is prompted to enter the password or, in case the standard input is redirected (e.g. by using command pipeline), the password is read from the standard input.
+  * **<nowiki>--</nowiki>vnc-nopasswd** - Do not require a password for VNC connections.
-**--vnc-port** <//port//>
+  * **<nowiki>--</nowiki>vnc-address** <//address//> - Sets the VNC address.
-Sets the VNC port.
-**--vnc-passwd** <//passwd//   //-//>
-Sets the VNC password to //passwd//. If **-** is specified, user is prompted to enter the password or, in case the standard input is redirected (e.g. by using command pipeline), the password is read from the standard input.
-**--vnc-nopasswd**
-Do not require a password for VNC connections.
-**--vnc-address** <//address//>
-Sets the VNC address.
 === High Availability Cluster ===
---ha-enable** <//yes// //no//>
+  * **<nowiki>--</nowiki>ha-enable** <//yes// //no//> - Adds the virtual environment to (**yes**) or removes it (**no**) from the High Availability Cluster. By default, the parameter is set to **yes**.
+  * **<nowiki>--</nowiki>ha-prio** <//number//> - Sets the virtual environment priority in the High Availability Cluster. Virtual environments with a higher priority are restarted first in the case of a system failure. If the parameter is not set for a virtual environment (default), it has the lowest priority and is restarted after all virtual environments with any priorities set.
-Adds the virtual environment to (**yes**) or removes it (**no**) from the High Availability Cluster. By default, the parameter is set to **yes**.
+=== Optimization parameters ===
-**--ha-prio** <//number//>
+  * **<nowiki>--</nowiki>nested-virt** <//on// //off//> - Disable or enable nested virtualization.
-Sets the virtual environment priority in the High Availability Cluster. Virtual environments with a higher priority are restarted first in the case of a system failure. If the parameter is not set for a virtual environment (default), it has the lowest priority and is restarted after all virtual environments with any priorities set.
+=== Miscellaneous parameters ===
-Optimization parameters
+  * **<nowiki>--</nowiki>applyconfig** <//path//> - Apply the resource parameter values from the specified VE configuration file to the virtual environment. The parameters defining the OS family and OS version are left intact.
---nested-virt** <//on// //off//>
+  * **<nowiki>--</nowiki>description** <//desc//> - Set the VE description.
+  * **<nowiki>--</nowiki>name** <//name//> - Change the VE name.
-Disable or enable nested virtualization.
+  * **<nowiki>--</nowiki>rename-ext-disks** - Rename bundles of the external disks on vm rename. That is move external disk from path ///somewhere/old-vm-name.pvm/diskname// to ///somewhere/new-vm-name.pvm/diskname//.
+  * **<nowiki>--</nowiki>autostart** <//on// //off// //auto//> - Set the virtual environment start-up options:
-**Miscellaneous parameters\\
+    * //on//: The virtual environment is started automatically on the R-Virtualization server boot. \
---applyconfig** <//path//>
+    * //off//: The virtual environment is left in the stopped state on the R-Virtualization server boot.
+    * //auto//: The virtual environment is returned to the state it was in when the R-Virtualization server was turned off.
-Apply the resource parameter values from the specified VE configuration file to the virtual environment. The parameters defining the OS family and OS version are left intact.
+  * **<nowiki>--</nowiki>autostart-delay** <//n//> - Delay some seconds at virtual environment autostart.
+  * **<nowiki>--</nowiki>autostop** <//stop// //suspend//> - Specifies the mode to set the virtual environment on the R-Virtualization Service shutdown.
-**--description** <//desc//>
+  * **<nowiki>--</nowiki>autocompact** <//on// //off//> - Turns on/off automatic virtual disk image compact.
+  * **<nowiki>--</nowiki>tools-autoupdate** <//on// //off//> - Turns on/off automatic updating of R-Virtualization Guest Tools in the guest operating system. If this option is set to on, R-Virtualization Guest Tools updates will be performed automatically every time an update is available for R-Virtualization software. If this option is set to off, no automatic R-Virtualization Guest Tools updates will be performed, so that you can do it manually at a convenient time.
-Set the VE description.
+  * **<nowiki>--</nowiki>on-crash** <//pause// //restart//>[://no-report//] - Specifies what to do with the virtual environment if it crashes: **pause** or **restart**. The problem report is sent by default. To omit, specify **no-report**.
+  * **<nowiki>--</nowiki>userpasswd** <//user:passwd//> - Sets the password for the specified user in the virtual environment. If the user account does not exist, it is created. R-Virtualization Guest Tools must be installed in the virtual environment for the command to succeed. If the **<nowiki>--</nowiki>crypted** parameter is specified, the system assumes that the passwords are encrypted (for Containers only).
-**--name** <//name//>
+  * **<nowiki>--</nowiki>host-admin** <//name//> - Specifies a host OS administrator’s name if an administrator’s password is required to change the password for the specified user in the virtual environment.
+  * **<nowiki>--</nowiki>template** <//yes// //no//> - Convert the virtual environment to template and vice versa.
-Change the VE name.
-**--rename-ext-disks**
-Rename bundles of the external disks on vm rename. That is move external disk from path ///somewhere/old-vm-name.pvm/diskname// to ///somewhere/new-vm-name.pvm/diskname//.
-**--autostart** <//on// //off// //auto//>
-Set the virtual environment start-up options: //\\
-on//: The virtual environment is started automatically on the R-Virtualization server boot. //\\
-off//: The virtual environment is left in the stopped state on the R-Virtualization server boot. //\\
-auto//: The virtual environment is returned to the state it was in when the R-Virtualization server was turned off.
-**--autostart-delay** <//n//>
-Delay some seconds at virtual environment autostart.
-**--autostop** <//stop// //suspend//>
-Specifies the mode to set the virtual environment on the R-Virtualization Service shutdown.
-**--autocompact** <//on// //off//>
-Turns on/off automatic virtual disk image compact.
-**--tools-autoupdate** <//on// //off//>
-Turns on/off automatic updating of R-Virtualization Guest Tools in the guest operating system. If this option is set to on, R-Virtualization Guest Tools updates will be performed automatically every time an update is available for R-Virtualization software. If this option is set to off, no automatic R-Virtualization Guest Tools updates will be performed, so that you can do it manually at a convenient time.
-**--on-crash** <//pause// //restart//>[://no-report//]
-Specifies what to do with the virtual environment if it crashes: **pause** or **restart**. The problem report is sent by default. To omit, specify **no-report**.
-**--userpasswd** <//user:passwd//>
-Sets the password for the specified user in the virtual environment. If the user account does not exist, it is created. R-Virtualization Guest Tools must be installed in the virtual environment for the command to succeed. If the **--crypted** parameter is specified, the system assumes that the passwords are encrypted (for Containers only).
-**--host-admin** <//name//>
-Specifies a host OS administrator’s name if an administrator’s password is required to change the password for the specified user in the virtual environment.
-**--template** <//yes// //no//>
-Convert the virtual environment to template and vice versa.
 === Managing VE devices ===
-The following options can be used to manage VE devices: **--device-add**, **--device-set**, and **--device-del**, **--device-connect**, **--device-disconnect**. Only one option can be specified at a time.
+The following options can be used to manage VE devices: **<nowiki>--</nowiki>device-add**, **<nowiki>--</nowiki>device-set**, and **<nowiki>--</nowiki>device-del**, **<nowiki>--</nowiki>device-connect**, **<nowiki>--</nowiki>device-disconnect**. Only one option can be specified at a time.
-**--device-add** <//hdd// //cdrom// //net// //fdd// //serial// //usb// //pci//> [**device_options**]
+**<nowiki>--</nowiki>device-add** <//hdd// //cdrom// //net// //fdd// //serial// //usb// //pci//> [**device_options**]
 == Adding virtual hard disk drives to VE ==
---device-add** //hdd// [**--image** <//image_name//>] [**--recreate**] [**--size** <//n//>] [**--iface** <//ide// //scsi// //virtio//>] [**--subtype** <//virtio-scsi// //hyperv//>] [**--position** <//n//>] [**--mnt** <//path//>]
+**<nowiki>--</nowiki>device-add** //hdd// [**<nowiki>--</nowiki>image** <//image_name//>] [**<nowiki>--</nowiki>recreate**] [**<nowiki>--</nowiki>size** <//n//>] [**<nowiki>--</nowiki>iface** <//ide// //scsi// //virtio//>] [**<nowiki>--</nowiki>subtype** <//virtio-scsi// //hyperv//>] [**<nowiki>--</nowiki>position** <//n//>] [**<nowiki>--</nowiki>mnt** <//path//>]
-**image_name**: the image file to be used to emulate the VE virtual hard disk. To use an existing image file, specify its name and path. To create a new image file, omit the **--image** option (a new file named **harddiskN.hdd** will be created in the VE directory) or use **--recreate** option. **\\
+  * **image_name**: the image file to be used to emulate the VE virtual hard disk. To use an existing image file, specify its name and path. To create a new image file, omit the **<nowiki>--</nowiki>image** option (a new file named **harddiskN.hdd** will be created in the VE directory) or use **<nowiki>--</nowiki>recreate** option.
-size**: the size of the hard disk drive, in megabytes. If the **--no-fs-resize** option is specified, the last partition on the hard disk is not resized. **\\
+  * **size**: the size of the hard disk drive, in megabytes. If the **<nowiki>--</nowiki>no-fs-resize** option is specified, the last partition on the hard disk is not resized.
-iface**: virtual hard disk interface type: either //ide// or //scsi// or //virtio//. **\\
+  * **iface**: virtual hard disk interface type: either //ide// or //scsi// or //virtio//.
-subtype**: SCSI controller subtype: //virtio-scsi// (default) or //hyperv//. **\\
+  * **subtype**: SCSI controller subtype: //virtio-scsi// (default) or //hyperv//.
-position**: the SCSI or IDE device identifier to be used for the disk drive. Allowed ranges:\\
+  * **position**: the SCSI or IDE device identifier to be used for the disk drive. Allowed ranges:
--3 for IDE disk drives\\
+    *  0-3 for IDE disk drives
--6 for SCSI disk drives **\\
+    * 0-6 for SCSI disk drives
-mnt**: the mount point to automount virtual hard disk inside the container’s guest OS
+  * **mnt**: the mount point to automount virtual hard disk inside the container’s guest OS
 == Managing virtual hard disk drives encryption ==
+ **<nowiki>--</nowiki>device-add** //hdd// **<nowiki>--</nowiki>encryption-keyid** <//key_id//> [**other HDD options**]
+ **<nowiki>--</nowiki>device-set** //hdd// **<nowiki>--</nowiki>encrypt <nowiki>--</nowiki>encryption-keyid** <//key_id//> [**<nowiki>--</nowiki>no-wipe**]
+ **<nowiki>--</nowiki>device-set** //hdd// **<nowiki>--</nowiki>decrypt** [**<nowiki>--</nowiki>no-wipe**]
+ **<nowiki>--</nowiki>device-set** //hdd// **<nowiki>--</nowiki>encryption-keyid** <//key_id//> [**<nowiki>--</nowiki>no-wipe**] [**<nowiki>--</nowiki>reencrypt**]
-**--device-add** //hdd// **--encryption-keyid** <//key_id//> [**other HDD options**] **\\
+  * **encrypt**: encrypt the hard disk drive contents with an encryption key given in the **<nowiki>--</nowiki>encryption-keyid** option
---device-set** //hdd// **--encrypt --encryption-keyid** <//key_id//> [**--no-wipe**] **\\
+  * **decrypt**: decrypt the encrypted hard disk drive
---device-set** //hdd// **--decrypt** [**--no-wipe**] **\\
+  * **encryption-keyid**: the identifier of a key used to encrypt the hard disk drive. When this option is used along with the **<nowiki>--</nowiki>encrypt** option, the provided key identifier is used to encrypt the non-encrypted virtual disk drive. When this option is used with the **<nowiki>--</nowiki>device-set** command, the already existing encryption key is changed to the provided one.
---device-set** //hdd// **--encryption-keyid** <//key_id//> [**--no-wipe**] [**--reencrypt**]
+  * **\\reencrypt**: re-encrypt the entire disk contents when changing the encryption key identifier. When the **<nowiki>--</nowiki>device-set** command is called with the **<nowiki>--</nowiki>encryption-keyid** option, only a small amount of encrypted data (i.e. LUKS header) is changed in the virtual disk drive. When the **<nowiki>--</nowiki>reencrypt** option is added to the command above, the entire disk contents are re-encrypted.
+  * **no-wipe**: remove the original virtual hard disk after it had been encrypted without securely erasing its data from the host disk drive. Without this option, after a virtual disk had been successfully encrypted, the original unencrypted data is securely erased from the host hard disk drive.
-**encrypt**: encrypt the hard disk drive contents with an encryption key given in the **--encryption-keyid** option **\\
+== Connecting physical hard disks to VE ==
-decrypt**: decrypt the encrypted hard disk drive **\\
-encryption-keyid**: the identifier of a key used to encrypt the hard disk drive. When this option is used along with the **--encrypt** option, the provided key identifier is used to encrypt the non-encrypted virtual disk drive. When this option is used with the **--device-set** command, the already existing encryption key is changed to the provided one. **\\
-reencrypt**: re-encrypt the entire disk contents when changing the encryption key identifier. When the **--device-set** command is called with the **--encryption-keyid** option, only a small amount of encrypted data (i.e. LUKS header) is changed in the virtual disk drive. When the **--reencrypt** option is added to the command above, the entire disk contents are re-encrypted. **\\
-no-wipe**: remove the original virtual hard disk after it had been encrypted without securely erasing its data from the host disk drive. Without this option, after a virtual disk had been successfully encrypted, the original unencrypted data is securely erased from the host hard disk drive.
-Connecting physical hard disks to VE
+**<nowiki>--</nowiki>device-add** //hdd// **<nowiki>--</nowiki>device** <//name//> [**<nowiki>--</nowiki>iface** <//ide// //scsi// //virtio//>] [**<nowiki>--</nowiki>position** <//n//>]
---device-add** //hdd// **--device** <//name//> [**--iface** <//ide// //scsi// //virtio//>] [**--position** <//n//>]
-**device**: the name of the physical hard disk on the R-Virtualization server to be connected to the VE. You can use the **server info** command to view the name of all physical disks currently existing on the R-Virtualization server. **\\
+  * **device**: the name of the physical hard disk on the R-Virtualization server to be connected to the VE. You can use the **server info** command to view the name of all physical disks currently existing on the R-Virtualization server.
-iface**: virtual hard disk interface type: either //ide// or //scsi// or //virtio//. **\\
+  * **iface**: virtual hard disk interface type: either //ide// or //scsi// or //virtio//.
-position**: the SCSI or IDE device identifier to be used for the disk drive. Allowed ranges:\\
+  * **position**: the SCSI or IDE device identifier to be used for the disk drive. Allowed ranges:
--3 for IDE disk drives\\
+    * 0-3 for IDE disk drives
--6 for SCSI disk drives
+    * 0-6 for SCSI disk drives
 == Adding virtual CD/DVD-ROM drives to VE ==
---device-add** //cdrom// **--image** <//name//> [**--iface** <//ide// //scsi//>] [**--subtype** <//virtio-scsi// //hyperv//>] [**--position** <//n//>]
+**<nowiki>--</nowiki>device-add** //cdrom// **<nowiki>--</nowiki>image** <//name//> [**<nowiki>--</nowiki>iface** <//ide// //scsi//>] [**<nowiki>--</nowiki>subtype** <//virtio-scsi// //hyperv//>] [**<nowiki>--</nowiki>position** <//n//>]
-**image**: connect the specified image file (either on the R-Virtualization server or on the client computer where you are running the **prlctl** utility) to the virtual environment. The following image file formats are supported: .iso, .cue, .ccd, and .dmg. **\\
+  * **image**: connect the specified image file (either on the R-Virtualization server or on the client computer where you are running the **prlctl** utility) to the virtual environment. The following image file formats are supported: .iso, .cue, .ccd, and .dmg.
-iface**: virtual CD/DVD-ROM interface type: either //ide// or //scsi//. **\\
+  * **iface**: virtual CD/DVD-ROM interface type: either //ide// or //scsi//.
-subtype**: SCSI controller subtype: //virtio-scsi// (default) or //hyperv//. **\\
+  * **subtype**: SCSI controller subtype: //virtio-scsi// (default) or //hyperv//.
-position**: the SCSI or IDE device identifier to be used for the DVD/CD-ROM drive. Allowed ranges:\\
+  * **position**: the SCSI or IDE device identifier to be used for the DVD/CD-ROM drive. Allowed ranges:
--3 for IDE disk drives\\
+    * 0-3 for IDE disk drives
--6 for SCSI disk drives
+    * 0-6 for SCSI disk drives
 == Connecting physical DVD/CD-ROM drive to VE ==
---device-add** //cdrom// **--device** <//name//> [**--iface** <//ide// //scsi//>] [**--position** <//n//>]
+**<nowiki>--</nowiki>device-add** //cdrom// **<nowiki>--</nowiki>device** <//name//> [**<nowiki>--</nowiki>iface** <//ide// //scsi//>] [**<nowiki>--</nowiki>position** <//n//>]
-**device**: the name of the physical DVD/CD-ROM on the R-Virtualization server to be connected to the VE. You can use the **server info** command to view the name of all DVD/CD-ROM drives currently existing on the R-Virtualization server. **\\
+  * **device**: the name of the physical DVD/CD-ROM on the R-Virtualization server to be connected to the VE. You can use the **server info** command to view the name of all DVD/CD-ROM drives currently existing on the R-Virtualization server.
-iface**: virtual CD/DVD-ROM interface type: either //ide// or //scsi//. **\\
+  * **iface**: virtual CD/DVD-ROM interface type: either //ide// or //scsi//.
-position**: the SCSI or IDE device identifier to be used for the DVD/CD-ROM drive. Allowed ranges:\\
+  * **position**: the SCSI or IDE device identifier to be used for the DVD/CD-ROM drive. Allowed ranges:
--3 for IDE disk drives\\
+    * 0-3 for IDE disk drives
--6 for SCSI disk drives
+    * 0-6 for SCSI disk drives
 == Adding virtual floppy disk drive to VE ==
---device-add** //fdd//
+**<nowiki>--</nowiki>device-add** //fdd//
 == Connecting physical floppy disk drive to VE ==
---device-add** //fdd// **--device** <//name//>
+**<nowiki>--</nowiki>device-add** //fdd// **<nowiki>--</nowiki>device** <//name//>
 == Adding virtual network adapters ==
---device-add** //net// {**--type** //routed//   **--network** <//network_id//>} [**--mac** <//addr// //auto//>] [**--ipadd** <//ip//>   **--ipdel** <//ip//>   **--dhcp** <//yes no//**>   --dhcp6** <//yes no//**] [--gw** <//gw//>] [**--gw6** <//gw//>] [**--nameserver** <//addr//>] [**--searchdomain** <//addr//>] [**--configure** <//yes no//>] [**--ipfilter** <//yes no//>] [**--macfilter** <//yes no//>] [**--preventpromisc** <//yes no//>] [**--adapter-type** <//virtio// //hyperv// //e1000// //rtl//>]
+**<nowiki>--</nowiki>device-add** //net// {**<nowiki>--</nowiki>type** //routed//   **<nowiki>--</nowiki>network** <//network_id//>} [**<nowiki>--</nowiki>mac** <//addr// //auto//>] [**<nowiki>--</nowiki>ipadd** <//ip//>   **<nowiki>--</nowiki>ipdel** <//ip//>   **<nowiki>--</nowiki>dhcp** <//yes no//**>   <nowiki>--</nowiki>dhcp6** <//yes no//**] [<nowiki>--</nowiki>gw** <//gw//>] [**<nowiki>--</nowiki>gw6** <//gw//>] [**<nowiki>--</nowiki>nameserver** <//addr//>] [**<nowiki>--</nowiki>searchdomain** <//addr//>] [**<nowiki>--</nowiki>configure** <//yes no//>] [**<nowiki>--</nowiki>ipfilter** <//yes no//>] [**<nowiki>--</nowiki>macfilter** <//yes no//>] [**<nowiki>--</nowiki>preventpromisc** <//yes no//>] [**<nowiki>--</nowiki>adapter-type** <//virtio// //hyperv// //e1000// //rtl//>]
-**type**: the type of the network adapter to create in the virtual environment. **\\
+  * **type**: the type of the network adapter to create in the virtual environment.
-network_id**: the name of the virtual network on the R-Virtualization server where the VE virtual adapter will be connected. **\\
+  * **network_id**: the name of the virtual network on the R-Virtualization server where the VE virtual adapter will be connected.
-mac**: the MAC address to be assigned to the virtual network adapter. If you omit this option, the MAC address will be automatically generated by the R-Virtualization software. **\\
+  * **mac**: the MAC address to be assigned to the virtual network adapter. If you omit this option, the MAC address will be automatically generated by the R-Virtualization software.
-ipadd**: the IP address to be assigned to the network adapter in the virtual environment. **\\
+  * **ipadd**: the IP address to be assigned to the network adapter in the virtual environment.
-ipdel**: the IP address to be removed from the network adapter in the virtual environment. **\\
+  * **ipdel**: the IP address to be removed from the network adapter in the virtual environment.
-dhcp**: specifies whether the virtual network adapter should get its IP settings through a DHCP server. **\\
+  * **dhcp**: specifies whether the virtual network adapter should get its IP settings through a DHCP server.
-dhcp6**: specifies whether the virtual network adapter should get its IPv6 settings through a DHCP server.\\
+  * **dhcp6**: specifies whether the virtual network adapter should get its IPv6 settings through a DHCP server. Use the **<nowiki>--</nowiki>ipadd** option to switch from DHCP to a static IP address.
-Use the **--ipadd** option to switch from DHCP to a static IP address. **\\
+  * **gw**: the default gateway to be used by the virtual environment.
-gw**: the default gateway to be used by the virtual environment. **\\
+  * **gw6**: the default IPv6 gateway to be used by the virtual environment.
-gw6**: the default IPv6 gateway to be used by the virtual environment. **\\
+  * **nameserver**: the default DNS server to be used by the virtual environment.
-nameserver**: the default DNS server to be used by the virtual environment. **\\
+  * **searchdomain**: the default search domain to be used by the virtual environment.
-searchdomain**: the default search domain to be used by the virtual environment. **\\
+  * **configure**: if set to "yes", the settings above are applied to the virtual network adapter instead of its original settings. Configuring any of the settings above automatically sets this option to "yes".
-configure**: if set to "yes", the settings above are applied to the virtual network adapter instead of its original settings. Configuring any of the settings above automatically sets this option to "yes". **\\
+  * **ipfilter**: determines if the specified network adapter is configured to filter network packages by IP address. If set to "yes", the adapter is allowed to send packages only from IPs in the network adapter’s IP addresses list.
-ipfilter**: determines if the specified network adapter is configured to filter network packages by IP address. If set to "yes", the adapter is allowed to send packages only from IPs in the network adapter’s IP addresses list. **\\
+  * **macfilter**: determines if the specified network adapter is configured to filter network packages by MAC address. If set to "yes", the adapter is allowed to send packages only from its own MAC address.
-macfilter**: determines if the specified network adapter is configured to filter network packages by MAC address. If set to "yes", the adapter is allowed to send packages only from its own MAC address. **\\
+  * **preventpromisc**: determines if the specified network adapter should reject packages not addressed to its virtual environment. If set to "yes", the adapter will drop packages not addressed to its virtual environment.
-preventpromisc**: determines if the specified network adapter should reject packages not addressed to its virtual environment. If set to "yes", the adapter will drop packages not addressed to its virtual environment. **\\
+  * **adapter-type**: specifies network adapter emulation type.
-adapter-type**: specifies network adapter emulation type.
 == Adding virtual serial port to VE ==
---device-add** //serial// {**--device** <//name//>   **--output** <//file//>   **--socket** <//file//> [**--socket-mode <**//server// //client//>]   **--socket-tcp** <//ip:port//> [**--socket-mode <**//server// //client//>]   **--socket-udp** <//ip:port//>
+**<nowiki>--</nowiki>device-add** //serial// {**<nowiki>--</nowiki>device** <//name//>   **<nowiki>--</nowiki>output** <//file//>   **<nowiki>--</nowiki>socket** <//file//> [**<nowiki>--</nowiki>socket-mode <**//server// //client//>]   **<nowiki>--</nowiki>socket-tcp** <//ip:port//> [**<nowiki>--</nowiki>socket-mode <**//server// //client//>]   **<nowiki>--</nowiki>socket-udp** <//ip:port//> [**<nowiki>--</nowiki>socket-mode <**//server// //client//>]}
-  [**--socket-mode <**//server// //client//>]}
+  * **device**: the number of the serial port on the R-Virtualization server to be used by the VE.
+  * **output**: the path to the file where the output of the virtual serial port will be sent.
-**device**: the number of the serial port on the R-Virtualization server to be used by the VE. **\\
+  * **socket**: the name of the physical socket on the R-Virtualization server where the serial port is to be connected. You can use the **<nowiki>--</nowiki>socket-mode** option to configure the port to operate in client or server mode. By default, server mode is enabled.
-output**: the path to the file where the output of the virtual serial port will be sent. **\\
+  * **socket-tcp**: the address of the socket on the R-Virtualization server where the serial port is to be connected. This socket uses TCP protocol. You can use the **<nowiki>--</nowiki>socket-mode** option to configure the port to operate in client or server mode. By default, server mode is enabled.
-socket**: the name of the physical socket on the R-Virtualization server where the serial port is to be connected. You can use the **--socket-mode** option to configure the port to operate in client or server mode. By default, server mode is enabled. **\\
+  * **socket-udp**: the address of the socket on the R-Virtualization server where the serial port is to be connected. This socket uses UDP protocol and operates in both client and server modes.
-socket-tcp**: the address of the socket on the R-Virtualization server where the serial port is to be connected. This socket uses TCP protocol. You can use the **--socket-mode** option to configure the port to operate in client or server mode. By default, server mode is enabled. **\\
-socket-udp**: the address of the socket on the R-Virtualization server where the serial port is to be connected. This socket uses UDP protocol and operates in both client and server modes.
 == Enable USB support ==
---device-add** <//usb//>
+**<nowiki>--</nowiki>device-add** <//usb//>
 == Connecting VT-d PCI devices ==
---device-add** <//pci//> **--device** <//name//>
+  * **<nowiki>--</nowiki>device-add** <//pci//> **<nowiki>--</nowiki>device** <//name//>  - Connects the specified VT-d PCI device to the virtual environment. To list the available devices, use the **prlsrvctl info** command.
+  * **<nowiki>--</nowiki>device-set** <//device_name//> [**<nowiki>--</nowiki>enable** **<nowiki>--</nowiki>disable**] [**<nowiki>--</nowiki>connect** **<nowiki>--</nowiki>disconnect**] - Used to configure various parameters of the specified virtual device. After its adding to the virtual environment, any device gets its own name (//<name>//) and can be managed using this name. You can use any of the parameters available to **<nowiki>--</nowiki>device-add** with **<nowiki>--</nowiki>device-set**.
+  * **<nowiki>--</nowiki>device-del** <//device_name//> [**<nowiki>--</nowiki>detach-only** **<nowiki>--</nowiki>destroy-image**] - Removes the specified device from the virtual environment. If **<nowiki>--</nowiki>detach-only** is specified and the device is a virtual hard disk drive, the disk image is preserved. If **<nowiki>--</nowiki>destroy-image** is specified, the virtual HDD image is removed from the server. If **<nowiki>--</nowiki>destroy-image-force** is specified, the virtual HDD image is removed from all snapshots and from the server. The default action on deleting a virtual HDD is to preserve the HDD image as if **<nowiki>--</nowiki>detach-image** was specified.
+  * **<nowiki>--</nowiki>device-connect** <//device_name//> - Used to connect the specified device to a running VE. Supported device types: fdd, cdrom, net. The device name could be obtained using the ’prlctl list -i’ command.
+  * **<nowiki>--</nowiki>device-disconnect** <//device_name//> - Disconnect the specified device.
+  * **<nowiki>--</nowiki>backup-add** <//backup_id//> <nowiki>[[</nowiki>**<nowiki>--</nowiki>disk** <//disk_name//>] [**<nowiki>--</nowiki>iface** <//ide// //scsi//>] [**<nowiki>--</nowiki>position** <//n//>] - Attach a backup to a virtual environment.
+    * **backup_id**: The identifier of the backup to attach. To list available backups, use the **backup-list** command. Please note that only backups on localhost can be attached.
+    * **disk_name**: The name of the disk in the backup to attach. If a disk is not specified, all disks contained in the backup will be attached. To list disks contained in a backup, use the **backup-list -f** command.
+    * **iface**: Virtual hard disk interface: //ide//, //scsi//.
+    * **position**: The SCSI, IDE device identifier to be used for the disk drive. Allowed ranges:
+      * 0-3 for IDE disk drives
+      * 0-6 for SCSI disk drives
+  * **<nowiki>--</nowiki>backup-del** <//backup_id// //all//> - Detach either the backup with the identifier **backup_id** or detach all backups from the virtual environment.\\
-Connects the specified VT-d PCI device to the virtual environment. To list the available devices, use the **prlsrvctl info** command.
+<WRAP center round tip 60%>
+To detach a single backup disk, use the **<nowiki>--</nowiki>device-del** command.
-**--device-set** <//device_name//> [**--enable** **--disable**]\\
+</WRAP>
-[**--connect** **--disconnect**]
-Used to configure various parameters of the specified virtual device. After its adding to the virtual environment, any device gets its own name (//<name>//) and can be managed using this name. You can use any of the parameters available to **--device-add** with **--device-set**.
-**--device-del** <//device_name//> [**--detach-only** **--destroy-image**]
-Removes the specified device from the virtual environment. If **--detach-only** is specified and the device is a virtual hard disk drive, the disk image is preserved. If **--destroy-image** is specified, the virtual HDD image is removed from the server. If **--destroy-image-force** is specified,\\
-the virtual HDD image is removed from all snapshots and from the server. The default action on deleting a virtual HDD is to preserve the HDD image as if **--detach-image** was specified.
-**--device-connect** <//device_name//>
-Used to connect the specified device to a running VE. Supported device types: fdd, cdrom, net. The device name could be obtained using the ’prlctl list -i’ command.
-**--device-disconnect** <//device_name//>
-Disconnect the specified device.
-**--backup-add** <//backup_id//> [[**--disk** <//disk_name//>] [**--iface** <//ide// //scsi//>]\\
-[**--position** <//n//>]
-Attach a backup to a virtual environment. **\\
-backup_id**: The identifier of the backup to attach. To list available backups, use the **backup-list** command. Please note that only backups on localhost can be attached. **\\
-disk_name**: The name of the disk in the backup to attach. If a disk is not specified, all disks contained in the backup will be attached. To list disks contained in a backup, use the **backup-list -f** command. **\\
-iface**: Virtual hard disk interface: //ide//, //scsi//. **\\
-position**: The SCSI, IDE device identifier to be used for the disk drive. Allowed ranges:\\
--3 for IDE disk drives\\
--6 for SCSI disk drives
-**--backup-del** <//backup_id// //all//>
-Detach either the backup with the identifier **backup_id** or detach all backups from the virtual environment.\\
-NOTE: To detach a single backup disk, use the **--device-del** command.
 ==== Backup and restore management ====
-The following command and options can be used to back up and restore a virtual environment. The **--storage** option allows you to specify the backup server. If this option is omitted, the local server is used. **\\
+The following command and options can be used to back up and restore a virtual environment. The **<nowiki>--</nowiki>storage** option allows you to specify the backup server. If this option is omitted, the local server is used.
-backup** <//ve_id// //ve_name//> [**-f,--full**] [**-i,--incremental**] [**-s,--storage**\\
+  * **backup** <//ve_id// //ve_name//> [**-f,<nowiki>--</nowiki>full**] [**-i,<nowiki>--</nowiki>incremental**] [**-s,<nowiki>--</nowiki>storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] [**<nowiki>--</nowiki>description** <//desc//>] [**<nowiki>--</nowiki>no-compression**] [**<nowiki>--</nowiki>no-tunnel**] [**<nowiki>--</nowiki>no-reversed-delta**] - Backs up the specified virtual environment.
-<**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] [**--description** <//desc//>]\\
+    * **-f,<nowiki>--</nowiki>full** - Create a full backup of the virtual environment. A full backup contains all virtual environment data.
-[**--no-compression**] [**--no-tunnel**] [**--no-reversed-delta**]
+    * **-i,<nowiki>--</nowiki>incremental** - Create an incremental backup of the virtual environment. An incremental backup contains only the files changed since the previous full or incremental backup. This is the default backup type.
+    * **<nowiki>--</nowiki>no-compression** - Do not compress backup image.
-Backs up the specified virtual environment.
+    * **<nowiki>--</nowiki>no-reversed-delta** - Do not create an intermediate temporary image for reversed delta writes.
+    * **<nowiki>--</nowiki>no-tunnel** - Do not use connection tunneling for backup. Connection tunneling is enabled for backup by default to provide secure data transmission.
-**-f,--full**
+  * **backup-list** [//ve_id// //ve_name//] [**-f,<nowiki>--</nowiki>full**] [**<nowiki>--</nowiki>vmtype ct vm all**][<nowiki>--</nowiki>localvms**] [-s,<nowiki>--</nowiki>storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] - Lists the existing backups. If the **<nowiki>--</nowiki>localvms** option is specified, list only backups that were created on the local server.
+  * **restore** {<**ve_id**>   **-t,<nowiki>--</nowiki>tag** <//backup_id//>} [**-s,<nowiki>--</nowiki>storage**<**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] [**-n,<nowiki>--</nowiki>name** <**new_name**>] [**<nowiki>--</nowiki>dst** <//path//>][**<nowiki>--</nowiki>no-tunnel**] - Restore the specified virtual environment. Only stopped virtual environments can be restored. If **backup_ID** is not specified, the latest backup version is restored.
-Create a full backup of the virtual environment. A full backup contains all virtual environment data.
+    * **-n,<nowiki>--</nowiki>name** <**new_name**> - Restore the virtual environment and assign the name **new_name** to it.
+    * **<nowiki>--</nowiki>dst** <**path**> - Restore the virtual environment data to the specified directory on the R-Virtualization server.
-**-i,--incremental**
+    * **<nowiki>--</nowiki>no-tunnel** - Do not use connection tunneling for restore. Connection tunneling is enabled for restore by default to provide secure data transmission.
+    * **<nowiki>--</nowiki>live** - Live restore reduces VM downtime by starting the restored VM right after the restore process begins.=
-Create an incremental backup of the virtual environment. An incremental backup contains only the files changed since the previous full or incremental backup. This is the default backup type.
+  * **backup-delete** {<//ve_id//>   **-t,<nowiki>--</nowiki>tag** <//backup_id//>} [**<nowiki>--</nowiki>keep-chain**] - Delete the backup for specified virtual environment. If **<nowiki>--</nowiki>keep-chain** is specified, the rest of the backup chain is preserved.
-**--no-compression**
-Do not compress backup image.
-**--no-reversed-delta**
-Do not create an intermediate temporary image for reversed delta writes.
-**--no-tunnel**
-Do not use connection tunneling for backup. Connection tunneling is enabled for backup by default to provide secure data transmission.
-**backup-list** [//ve_id// //ve_name//] [**-f,--full**] [**--vmtype ct vm all**]\\
-[--localvms**] [-s,--storage** <**user<nowiki>[[:</nowiki>passwd]@server[:port]**>]
-Lists the existing backups. If the **--localvms** option is specified, list only backups that were created on the local server.
-**restore** {<**ve_id**>   **-t,--tag** <//backup_id//>} [**-s,--storage**\\
-<**user<nowiki>[[:</nowiki>passwd]@server[:port]**>] [**-n,--name** <**new_name**>] [**--dst** <//path//>]\\
-[**--no-tunnel**]
-Restore the specified virtual environment. Only stopped virtual environments can be restored. If **backup_ID** is not specified, the latest backup version is restored.
-**-n,--name** <**new_name**>
-Restore the virtual environment and assign the name **new_name** to it.
-**--dst** <**path**>
-Restore the virtual environment data to the specified directory on the R-Virtualization server.
-**--no-tunnel**
-Do not use connection tunneling for restore. Connection tunneling is enabled for restore by default to provide secure data transmission.
-**--live**
-Live restore reduces VM downtime by starting the restored VM right after the restore process begins.
-**backup-delete** {<//ve_id//>   **-t,--tag** <//backup_id//>} [**--keep-chain**]
-Delete the backup for specified virtual environment. If **--keep-chain** is specified, the rest of the backup chain is preserved.
 ==== Migration management ====
 The following options can be used to migrate a virtual environment from the source server **src** to the destination server **dst**. If the virtual environment is running, the migration is performed as follows. First, virtual environment data is copied to the destination server, then the virtual environment is suspended, and, finally, the remaining data is migrated. After the virtual environment has been successfully migrated, it is removed from the source server.
-  * **migrate** <[**src/**]**ID**> <**dst**[**/NAME**]> [**--dst** <//path//>] [**--changesid**] [**--clone** **--remove-src**] [**--no-compression**] [**--ssh** <//options//>] - Migrates the specified virtual environment from the source server **src** to the destination server **dst**. The source and destination servers must be specified in this format: [user[:password]@]server_IP_address_or_hostname[:port]. If the source server is omitted, the local server is assumed.
+  * **migrate** <[**src/**]**ID**> <**dst**[**/NAME**]> [**<nowiki>--</nowiki>dst** <//path//>] [**<nowiki>--</nowiki>changesid**] [**<nowiki>--</nowiki>clone** **<nowiki>--</nowiki>remove-src**] [**<nowiki>--</nowiki>no-compression**] [**<nowiki>--</nowiki>ssh** <//options//>] - Migrates the specified virtual environment from the source server **src** to the destination server **dst**. The source and destination servers must be specified in this format: [user[:password]@]server_IP_address_or_hostname[:port]. If the source server is omitted, the local server is assumed.
-    * **--changesid** - This option is used to change the current Windows security identifier (SID) of a Windows-based virtual machine template. It requires R-Virtualization Guest Tools to be installed in the virtual machine template.
+    * **<nowiki>--</nowiki>changesid** - This option is used to change the current Windows security identifier (SID) of a Windows-based virtual machine template. It requires R-Virtualization Guest Tools to be installed in the virtual machine template.
-    * **--clone** - If this option is provided, the original virtual environment will be cloned to destination and left intact on the source server. The clone will have a different UUID, MAC address, and SID (Windows-based virtual machines only; if **--changesid** is used) and will have offline management disabled. If this option is omitted, the original virtual environment will be removed from the source server after migration.
+    * **<nowiki>--</nowiki>clone** - If this option is provided, the original virtual environment will be cloned to destination and left intact on the source server. The clone will have a different UUID, MAC address, and SID (Windows-based virtual machines only; if **<nowiki>--</nowiki>changesid** is used) and will have offline management disabled. If this option is omitted, the original virtual environment will be removed from the source server after migration.
-    * **--remove-src** - If this option is provided, the source bundle will be removed after migration. Cannot be used together with **--clone**. This option is enabled for virtual machines by default.
+    * **<nowiki>--</nowiki>remove-src** - If this option is provided, the source bundle will be removed after migration. Cannot be used together with **<nowiki>--</nowiki>clone**. This option is enabled for virtual machines by default.
-    * **--no-compression** - Do not compress data during migration.
+    * **<nowiki>--</nowiki>no-compression** - Do not compress data during migration.
-    * **--no-tunnel** - Do not use connection tunneling for migration. Connection tunneling is enabled for migration by default to provide secure data transmission.
+    * **<nowiki>--</nowiki>no-tunnel** - Do not use connection tunneling for migration. Connection tunneling is enabled for migration by default to provide secure data transmission.
-    * **--ssh** <//options//> - Options to pass to ssh when it is used to establish a connection to the destination server. Any of the standard ssh options are allowed.
+    * **<nowiki>--</nowiki>ssh** <//options//> - Options to pass to ssh when it is used to establish a connection to the destination server. Any of the standard ssh options are allowed.
 <WRAP center round tip 60%>
@@ Line 680: / Line 454: @@
 ==== Snapshot management ====
-  * **snapshot** <//ve_id// //name//> [**-n**,**--name** <//name//>] - This command is used to create VE snapshot. Note: Taking a snapshot of a running VE saves not only its filesystem state but in-memory state as well.
+  * **snapshot** <//ve_id// //name//> [**-n**,**<nowiki>--</nowiki>name** <//name//>] - This command is used to create VE snapshot. Note: Taking a snapshot of a running VE saves not only its filesystem state but in-memory state as well.
-  * **snapshot-list** <//ve_id// //name//> [{**-t**,**--tree**]   [**-i**,**--id** <//snapid//>}] - This command is used to list the virtual environment’s snapshots tree. There are three modes of snapshot listing, if no option specified the snapshot tree represented in two columns "PARENT_SNAPSHOT_ID SNAPSHOT_ID". If **-t**,**--tree** option is specified draw the tree. If **-i**,**--id** <//snapid//> option is specified, display the snapshot information
+  * **snapshot-list** <//ve_id// //name//> [{**-t**,**<nowiki>--</nowiki>tree**]   [**-i**,**<nowiki>--</nowiki>id** <//snapid//>}] - This command is used to list the virtual environment’s snapshots tree. There are three modes of snapshot listing, if no option specified the snapshot tree represented in two columns "PARENT_SNAPSHOT_ID SNAPSHOT_ID". If **-t**,**<nowiki>--</nowiki>tree** option is specified draw the tree. If **-i**,**<nowiki>--</nowiki>id** <//snapid//> option is specified, display the snapshot information
-  * **snapshot-delete** <//ve_id// //name//> **-i**,**--id** <//snapid//> [**-c**,**--children**] - Deletes snapshot with the specified //snapid//. If the **-c**,**--children** option is specified, all snapshot’s children are also deleted. Otherwise they become the children of the deleted snapshot’s parent.
+  * **snapshot-delete** <//ve_id// //name//> **-i**,**<nowiki>--</nowiki>id** <//snapid//> [**-c**,**<nowiki>--</nowiki>children**] - Deletes snapshot with the specified //snapid//. If the **-c**,**<nowiki>--</nowiki>children** option is specified, all snapshot’s children are also deleted. Otherwise they become the children of the deleted snapshot’s parent.
-  * **snapshot-switch** <//ve_id// //name//> **-i**,**--id** <//snapid//> - Used to revert to selected snapshot.
+  * **snapshot-switch** <//ve_id// //name//> **-i**,**<nowiki>--</nowiki>id** <//snapid//> - Used to revert to selected snapshot.
 ==== Hostname management ====
-  * **--hostname** <//hostname//> - Sets the hostname for the virtual environment. For virtual machines, R-Virtualization Guest Tools must be installed in the virtual machine.
+  * **<nowiki>--</nowiki>hostname** <//hostname//> - Sets the hostname for the virtual environment. For virtual machines, R-Virtualization Guest Tools must be installed in the virtual machine.
 ==== Offline management ====
-  * **--offline-management** <//on// //off//> - Enable/disable the offline management feature. This feature defines whether the virtual environment can be managed using the services set by the --offline-management option.
+  * **<nowiki>--</nowiki>offline-management** <//on// //off//> - Enable/disable the offline management feature. This feature defines whether the virtual environment can be managed using the services set by the <nowiki>--</nowiki>offline-management option.
-  * **--offline-service** <//service_name//> Defines whether the virtual environment can be managed by means of R-Virtualization Power Panel or Plesk or both. Valid only if the OFFLINE_MANAGEMENT parameter is set to "yes". The names of the available services can be taken from the file names (excluding the .conf extension) in the /etc/vzredirect.d directory on the server.
+  * **<nowiki>--</nowiki>offline-service** <//service_name//> Defines whether the virtual environment can be managed by means of R-Virtualization Power Panel or Plesk or both. Valid only if the OFFLINE_MANAGEMENT parameter is set to "yes". The names of the available services can be taken from the file names (excluding the .conf extension) in the /etc/vzredirect.d directory on the server.
 ==== Network bandwidth management ====
-  * **--rate** <//class//://KBits//> - Specifies the bandwidth guarantee of the virtual environment for the specified network class.
+  * **<nowiki>--</nowiki>rate** <//class//://KBits//> - Specifies the bandwidth guarantee of the virtual environment for the specified network class.
-  * **--ratebound** <//yes// //no//> - If set to "//yes//", the bandwidth guarantee is also the limit for the virtual environment. If set to "//no//", the bandwidth limit is defined by the TOTALRATE parameter in the /etc/vz/vz.conf file.
+  * **<nowiki>--</nowiki>ratebound** <//yes// //no//> - If set to "//yes//", the bandwidth guarantee is also the limit for the virtual environment. If set to "//no//", the bandwidth limit is defined by the TOTALRATE parameter in the /etc/vz/vz.conf file.
 ===== Performance statistics =====
-  *  **statistics** {<//ve_id// //ve_name//> **-a**,**--all**} [**--filter** <//filter//>] [**--loop**] - Print performance statistics for running virtual machines and containers on the server.
+  *  **statistics** {<//ve_id// //ve_name//> **-a**,**<nowiki>--</nowiki>all**} [**<nowiki>--</nowiki>filter** <//filter//>] [**<nowiki>--</nowiki>loop**] - Print performance statistics for running virtual machines and containers on the server.
-  * **--filter** <//filter//> - Specifies the subset of performance statistics to collect and print. If omitted, all available statistics are shown. Asterisks ("*****") can be used as wildcards for any number of arbitrary characters. The available filters are listed below ("**#**" is the device or filesystem index).
+    *  **<nowiki>--</nowiki>filter** <//filter//> - Specifies the subset of performance statistics to collect and print. If omitted, all available statistics are shown. Asterisks ("*****") can be used as wildcards for any number of arbitrary characters. The available filters are listed below ("**#**" is the device or filesystem index).
 ==== Storage device statistics ====
@@ Line 759: / Line 533: @@
   * guest.fs#.disk.# - Disk indices
-  * **--loop** - Print statistics every second until the program is terminated.
+  * **<nowiki>--</nowiki>loop** - Print statistics every second until the program is terminated.
-  * **--all** - Print statistics for all running virtual machines and containers on the server.
+  * **<nowiki>--</nowiki>all** - Print statistics for all running virtual machines and containers on the server.
 ===== DIAGNOSTICS  =====
@@ Line 770: / Line 544: @@
 To create and start a VM having the name of //win2003// and based on the ’Windows XP’ template:
- prlctl create win2003 --ostemplate ’Windows XP’
+ prlctl create win2003 <nowiki>--</nowiki>ostemplate ’Windows XP’
  prlctl start win2003
@@ Line 787: / Line 561: @@
 ===== SEE ALSO  =====
-**prlsrvctl**(8)
+**[[domestic:rosplatforma:man:prlsrvctl]]**(8)
 ===== COPYRIGHT  =====

Tools

menus and quick search

quick search

site status

location indicator

Page Tools

meta data for this page

Differences